Home > Cisco Network Products
Used
Cisco Systems Networking Equipment
Please send us a
Quote Request. We
will respond quickly.
Allstar Networks sells every product that Cisco Systems offers
including:
Used Cisco 12000 Series Routers
Used Cisco MCS-7830 Server
Used Cisco 10000 Series
7600 Series Routers
7400 Series Routers
 The
Used Cisco 12000 series Internet Router is part of Used Cisco's family
of multimillion packets-per-second (pps) IP and MPLS routing platforms
for building profitable networks in today's communications economy. The
Used Cisco 12000 Series is the premier high-end routing platform for
service provider backbone and edge applications, enabling service
providers to meet the challenge of building packet networks to satisfy
services demand while increasing profitability. The Used Cisco 12000
Series offers the only portfolio of 10 Gbps per slot systems and
interfaces (including Packet over SONET [POS], Dynamic Packet
Transport/Resilient Packet Ring [DPT/RPR], and Gigabit Ethernet [GbE]),
delivering 10G economies of scale anywhere in the network. The Used
Cisco 12000 Series provides the highest reliability, the richest set of
service enablers, the lowest total cost of ownership, and the only
proven investment protection, including systems that can be upgraded in
the field to increase switching capacity. This innovative combination of
features and capabilities enables service providers to build the most
competitive IP and MPLS networks.
To learn more about the Used Cisco 12000 Series Internet Router, please
visit their Model Comparison page.
To learn more about the broad portfolio of interfaces available on the
Used Cisco 12000 Series, including Packet over SONET/SDH, Resilient
Packet Ring, and Ethernet, please visit the Used Cisco 12000 Series
Internet Routers Line Card page Used Cisco 12000 Series Internet Routers
Line Card page.
 The
Used Cisco Media Convergence Server 7830 (MCS-7830) is a
high-availability server platform for Used Cisco AVVID (Architecture for
Voice, Video and Integrated Data). The MCS-7830 is a member of the
MCS-7800 series server family, which also includes the cost-effective
MCS-7820.
AVVID IP telephony starter kits. With Used Cisco CallManager software
preinstalled in this fault-tolerant server, the wide-scale deployment of
industry-leading Used Cisco IP telephony solutions has never been
easier. The Used Cisco MCS-7830 is an integral part of a complete,
scalable architecture for a new generation of high-quality IP voice
solutions that run on the enterprise data network. The MCS-7830 delivers
the high performance and availability demanded by today"s enterprise
networks and represents a turnkey solution that is easy to deploy and
highly cost-effective.
The Used Cisco Unified Open Network Exchange (Used Cisco uOne), an
integral part of Used Cisco AVVID, is a voice and unified-messaging
application. The first commercially available version of Used Cisco uOne
4.1E-Entry Edition-runs on the Used Cisco Media Convergence Server 7830
(MCS-7830) and is available for the North American market.
Used Cisco 10700 Series Internet Routers
 The
Used Cisco 10700 Series Internet Routers are the only metro edge access
routers designed to optimize optical transport with Dynamic Packet
Transport (DPT), Used Cisco's market leading Resilient Packet Ring (RPR)
technology, to integrate full IP routing and services and to deliver
intelligent Ethernet subscriber interfaces for simple, scalable, and
reliable networks.
-
Enables
providers to extend their existing Carrier IP/MPLS infrastructure
into the metro to deliver rich Ethernet and IP services.
-
Delivers
highly programmable, high-end routing features in a compact, 2 rack
unit form factor.
-
The only
proven Metro access solution to integrate Resilient Packet Ring (RPR)
technology -- which doubles network bandwidth over traditional SONET
technologies -- while maintaining sub-50ms network restoration.
 Used
Cisco 10000 Series for Integrated Edge Aggregation
The Used Cisco 10000 Series offers a single solution for leased-line,
ATM, frame relay, and broadband aggregation while providing customers
with high-performance IP services, maximum platform scalability, and
high availability.
High-Performance IP Services The Used Cisco 10000 Series
enables service providers to deploy revenue-generating services without
worrying about performance degradation.
-
The 10000 Series supports Used
Cisco-patented parallel express forwarding (PXF) technology. PXF
provides customers with the ability to turn on multiple IP services
while maintaining line-rate performance. Since PXF is
software-based, customers can add new service functionality without
swapping out hardware.
-
The 10000 Series supports a wide range
of critical edge services, including quality of service (QoS),
Multiprotocol Label Switching (MPLS), Multilink PPP (MLPPP),
Broadband aggregation, and access control lists (ACLs).
Carrier-Class High Availability With its carrier-class high
availability, the Used Cisco 10000 Series minimizes costly network
outages and maximizing end-customer satisfaction.
Maximum Scalability With an eight-slot chassis that can hold up to
16 line cards, the Used Cisco 10000 Series leverages service providers’
current investments by enabling future network growth while minimizing
network complexity.
-
The 10000 Series supports thousands of
DS0/DS1/E1 connections in a single system, enabling service
providers to seamlessly grow with their customer base. Because the
Used Cisco 10000 Series supports Frame Relay, ATM, Leased Line, and
Broadband aggregation in a single platform, customers can provision
multiple types of services to the end-user without having to
maintain multiple edge devices.
 The
Used Cisco 7600 Series Router delivers high-performance WAN and MAN
networking with line-rate IP services. Now, service providers and
enterprises can "service enable" and scale their networks from
OC-48/STM-16 to DS0 to offer differentiated services to both customers
and remote sites. The 7600 embodies the strengths of the leading-edge
midrange routing products from Used Cisco, offering greater performance,
scalability, and breadth of interfaces than any other router platform in
the same class.
Cisco 7600 Router Features and Benefits
-
NEBS-compliant chassis—3-slot, 6-slot,
and 9-slot.
-
Supervisor Engine II with Policy Feature
Card 2 (PFC2) and MultiSwitch Feature Card 2 (MSFC2) —30 Mpps.
-
Switch Fabric Module—256-Gbps crossbar
fabric (optional).
-
Optical Services Modules (OSMs) —Scaling
from OC-3/STM-1 to OC-48/STM-16.
-
Catalyst 6500 LAN interfaces—Scaling
from 10 Mbps to 10 Gbps.
-
FlexWAN Module—Supporting Used Cisco
7200 and 7500 series port adapters from DS0 to OC3/STM-1.
-
Catalyst 6500 Service Modules—Content
switching, firewalls, and more.
-
Adaptive" network processing on each OSM
for flexible feature implementation.
-
High-performance IP services—MPLS/VPN,
Class-Based Weighted Fair Queuing/Low-Latency Queuing (CBWFQ/LLQ),
Weighted Random Early Detection (WRED), hierarchical traffic
shaping, Any Transport over MPLS (AToM), future
Destination-sensitive services—Accounting, billing, and quality of
service (QoS).
 The
Used Cisco 7400 is the highest performance single-rack unit (RU) router
on the market. Its compact, stackable architecture is expressly designed
for application specific routing deployments in service provider and
enterprise networks. Taking advantage of the Parallel Express Forwarding
(PXF) delivers a premium suite of hardware-accelerated network services.
Content courtesy of Cisco™ | 
